特殊場景卡/慢/ FPS不穩定解決辦法
原文內容:
I think I just figured out something that might interest some of you having frame rate issues. I have a Nvidia chipset on this particular PC, but ATI should be similar if this problem is also found on ATI cards.

I went into my Nvidia Control panel to try and figure out what's going on in this game. I saw ran a log in the background and noticed some strange CPU and GPU things going on, so I started looking around in my setting for what might be causing this issue. I know the game uses a lot of breakable objects and some physics, so I figured it was a combination CPU use and a bottleneck on the GPU side with the sync'd to 30hz/60hz

Anyway - Try the following if you are getting jerky frame rates in specific zones.

- Go into you vidcard control panel and see if you can create profiles for each game.
- Create a profile for Ghostbusters
- I turned off Multiple Monitor and put Single only.
- Turn on Triple Buffers to smooth out FPS lock.
** Now here's the big setting that made the game run MUCH better **
- Look in the main control panel area for PhysX Acceleration. Disable this setting. Sadly, you can't save per game this setting from the looks of it.
- Start GB and you should notice that the game runs fluid even in the areas where FPS was dropping to single-digits.
Hope this helps you guys out there!

在此翻譯重點解決方法:
打開Nvidia控制面板,假如有使用多個顯示器,請?jiān)O(shè)定只使用單一顯示器
看一下抓鬼特攻隊有沒有在程式設定里面(Nvidia控制面板-->進階設定-->管理3d設定-->程式設定)
沒有的話,請建立一個抓鬼特攻隊的程式設定(預設應該已經有了)
將三重緩沖選項開啟(預設應該是開啟的)
重點是到PhysX組態設定將PhysX選項關閉
設定結束,啟動抓鬼特攻隊,將會發現游戲進行的很順暢,就算到了FPS數字會降到單位數的場景,還是依然很流暢!