駕駛模擬游戲微軟模擬飛行2020目前已經在steam和微軟商店正式發(fā)售，游戲中有自動駕駛系統可供玩家選擇使用，下面給大家分享波音747-8自動駕駛指南

此文章為 “波音747-400” 機型的 自動駕駛儀, 僅供參考和理解自動駕駛系統的邏輯

荷蘭皇家航空 KLM Boeing 747-400

MCP

The autopilot and flight director Mode Control Panel (MCP) in the Boeing 747 is located in the glare shield and is the human machine interface to the flight guidance system of this airliner.

The MCP of this Boeing aircraft can be be split into several regions:

Auto Throttle, Speed, Heading, Vertical Speed, Altitude, Approach and Autopilot Masters

波音747的自動駕駛儀和飛行指揮器模式控制面板(MCP)位于防眩光罩中，是該飛機飛行指導系統的人機界面。

這架波音飛機的MCP可以分為幾個區(qū)域：

自動油門，速度，航向，垂直速度，高度，進近和自動駕駛大師

MCP模式控制板

Overview of the buttons, switches and knobs:

F/D - Toggles visibility of Flight Director

Speed

A/T ARM - arms or disengages Auto Throttle

THR - Thrust Button reduces or increases thrust reference (THR REF)

SPD - Speed Button selects auto throttle speed (SPD)

IAS/MACH - Speed window that displays the selected airspeed, blanked if VNAV controls speed

SEL - Toggles between IAS and MACH display

Speed Knob - rotated to adjust selected speed, pushed for speed intervention

LNAV - Lateral NAVigation is engaged with this button

VNAV - Vertical NAVigation is engaged with this button

FLCH - Flight Level CHange button can be pressed to command a climb or descent towards selected altitude

Heading

HDG - Selected Heading window always showing the currently selected heading

HDG Knob - Changes the selected heading

SEL - Engages the selected heading mode (HDG SEL)

BANK LIMIT - Selector for the maximum bank angle for autopilot turns

HOLD - levels the aircraft and holds present heading (HDG HOLD)

Vertical Speed

VERT SPD - Selected vertical speed window. Blanked when active vertical mode is not vertical speed

Vertical Speed Wheel - used to nose down (increase sinkrate) or nose up (increase vertical speed)

VS - Engages Vertical Speed (VS) hold mode

Altitude

ALT - Selected altitude window

ALT knob - Rotated to increase or decrease selected altitude

HOLD - button to command an immediate level off and maintain present altitude (ALT HOLD)

Approach

LOC - Arms localizer capture only

APP - Arms localizer and glide slope capture or, if no ILS approach was programmed, arms LNAV and VNAV approach.

Autopilot Masters

A/P ENGAGE: L CMD, C CMD, R CMD engage the left, center and right autopilot command (CMD).

DISENGAGE - Disconnects all three autopilots