ALT

The altitude hold mode (ALT) either engages automatically when the selected altitude is capturing or is activated by pressing the altitude HOLD button. The pitch of the aircraft is adjusted to stay on the target altitude.

Click the HOLD button underneath the selected altitude knob. The aircraft will immediately level off and fly back to the altitude at which the button has been clicked.

Click the HOLD button again to re-synchronize the target altitude with the current altitude

Note - When the HOLD button is illuminated the selected altitude knob above is not affecting the target altitude. When ALT engages from another vertical mode the selected altitude at the time of engagement. When ALT is manually selected the current altitude at engagement is used, not the selected altitude.

捕捉到選定的海拔高度時，海拔保持模式(ALT)會自動啟用，或者通過按一下海拔保持altitude HOLD按鈕激活。調整飛機的俯仰以保持在目標高度上。

海拔保持模式(ALT)

單擊所選高度旋鈕下方的HOLD按鈕。飛機將立即升空并飛回單擊該按鈕的高度。

再次單擊“HOLD”保持按鈕以將目標海拔高度與當前海拔高度重新同步

注意 -當HOLD按鈕點亮?xí)r，上方所選的高度旋鈕不會影響目標高度。當ALT從另一種垂直模式轉換過來并啟用時，選定的高度將會被實施。當手動選擇ALT的模式時，將使用當前的高度，而不是所選高度進行實施。