G/S

The Glide Slope (G/S) mode is used to neutralize the ILS glide slope deflection. It requires an ILS frequency to be set in the navigation receivers, currently those are tuned automatically if a flight route has been created.

Click the APP button on the MCP to arm the localizer and glide slope capture when an ILS is received

The glide slope captures when the glide slope diamond is moving towards the center. It can be intercepted from below or above.

Note - The glide slope can only capture after the localizer. The aircraft will not descent when it is not established on the localizer yet. Similarly, when the localizer signal is lost or the localizer deviates too much and the localizer tracking is lost then glide slope is disengaged as well. V/S engages instead.

滑行坡度(G/S)模式用于抵消ILS滑行下滑道偏差。它要求在導航接收機中設置ILS頻率，當前，如果已創建飛行路線，則將自動對其進行調諧。

單擊MCP上的APP按鈕，以在收到ILS時武裝定位器和下滑道捕獲

下滑道菱形移向中心時捕獲滑坡。可以從下方或上方攔截它。

注意 -滑坡只能在定位器Localizer之后捕獲。如果尚未捕獲定位器，飛機將不會下降。類似地，當定位器信號丟失 或 定位器偏離太大導致定位器跟蹤丟失時，下滑道也將脫離。V/S將代替啟用。