全自動著陸 Fully Automatic Landing

The fully automatic landing can only be performed on an ILS equipped runway. The ILS receivers have to be tuned to the ILS frequency for the approach. Auto tuning does this for us when we come close to the destination runway.

全自動降落只能在配備ILS的跑道上進行。必須將ILS接收機調諧到ILS頻率來進行進場。當我們靠近目標跑道時，自動轉彎會為我們做到這一點。

啟用自動駕駛和自動油門

We assume no flight director, autopilot or auto throttle was engaged before and we are flying manually.

Configure for a normal landing (flaps, gear, auto brake, spoilers armed,…). You can set final landing flaps in the final approach…

Click the left and right FD switches to engage the flight directors

Click HDG HOLD and ALT HOLD

Engage the auto throttle in SPD mode by switching the A/T switch to ARM and pressing the SPD button to engage auto thrust in SPD mode

Engage one of the three autopilots

我們假設之前沒有啟用過過飛行指揮儀，自動駕駛儀或自動油門，并且我們正在手動飛行。

單擊左右FD開關

單擊“HDG HOLD"

單擊“ALT HOLD”

A / T開關切換至ARM并按SPD按鈕

啟動三個自動駕駛儀之一

配置到正常著陸的設定(襟翼，起落架，自動剎車，擾流板武裝等)。您可以在最終進場中設置最終角度的著陸襟翼...

單擊左右FD開關以使飛行指導Flight Director啟動

單擊“HDG HOLD”和“ALT HOLD”

通過將A / T開關切換至ARM并按SPD按鈕以在SPD模式下啟用自動推力，將自動油門置于SPD模式下

啟動三個自動駕駛儀之一